How to Find a Quality Weed Grinder- Features and Housing

Are you looking for a way to help chop up your marijuana plants that is both quick and easy? If so, you’ll want to check out grinders.

Grinders are the perfect way to help chop up leaves as they are specially designed with sharp teeth and filters to ensure that the leaves are completely cut up. These devices are not only easy to use, but often run quietly which is usually uncommon with devices that run on a hand-turned motor. This article highlights some of the best grinders on the market today that you should definitely consider using with your plants. Keep reading to learn more about them.

There are plenty of grinders available for you to buy, but that doesn’t mean all of them will work well. Grinders work pretty similarly compared to each other, but there are a few important things you’ll want to look for before you invest in one.

A Durable Housing

This is probably one of the most important things you can look for in a grinder and is a crucial feature because a grinder does heavy-duty work. You need to twist its lid around and constantly take it apart to remove the items from it and to clean it. A housing that is made of flimsy materials will only end up breaking quickly leaving you needing to buy another grinder.

Some durable housing materials you’ll want to look for are stainless steel and aluminum. These are extremely strong materials and withstand a lot of wear and tear. Also, some models come with a scratch-proof exterior which can be very beneficial as it will help to prevent unsightly marks from occurring on it.

Diamond Teeth

The teeth are yet another vital aspect to look at when shopping for grinders. These are what will chop up the leaves so you can use them. There are plenty of teeth types grinders feature, but one of the best types is diamond teeth. These teeth are usually the sharpest and work to quickly grind up the leaves.

However, no matter which type of teeth you choose you to need to make sure there are enough of them in the grinder. Overall, there should be at least 10 teeth. Anything lower than that will only make it much more difficult for the grinder to properly grind the leaves up.

A Magnetic Lid

A magnetic lid is a useful feature to have as it helps to ensure that the lid doesn’t come undone when you’re twisting it. It can be very easy for the lid to do so as you need to constantly keep turning it which can lead to it sometimes popping off.

A magnetic lid will have magnets built into it which will help to secure it to the grinder’s construction so when you go to turn the lid it won’t pop off unless you pull it off.


While these products aren’t really that big they can still be a little bit of a hassle to carry around when fully intact. If you’re someone who wants to always have your grinder with you, make sure that it’s portable. Many grinders have the ability to be taken apart and turned into a small portable one that you can easily put into your pocket or carrying case. However, not all have this feature so if this is something you prefer to have to make sure to do careful research on the grinder you’re interested in to see if it is portable.

Pollen Catcher

You more than likely don’t want to find pollen in your leaves after you grind them up. So, to prevent this, be sure to check for a pollen catcher. Most grinders have them but some might not. A pollen catcher will prevent the pollen from escaping in your freshly ground up leaves and will store the pollen in a special chamber where you can then remove it.

Often if a grinder has a pollen catcher it will come with a pollen scraper. This helpful scraper will help you to remove the pollen from the chamber so it can be cleaned.


Windows in a grinder are very helpful to have as they’ll allow you to see the leaves that you’ve ground up and ensure you empty the grinder when it’s full.

Insider Tip: check out these gadgets as some of them would be perfect accessories to a quality grinder

One thing to remember is that many grinders have their own window sizes and style. For instance, the chamber where the ground up leaves fall in one model might be entirely clear while another model might only have a slight opening for you to see into it. You’ll want to keep these different styles in mind before investing in a grinder.


Besides making sure pollen doesn’t fall through into your freshly cut leaves, filters can also help to remove other items like hard stems and flowers. Filters will sort the items out so that when you remove your leaves from the grinder that’s the only thing in that mixture.

There are plenty of different designs that filters have, but one you’ll definitely want to consider is a stainless steel mesh one. The stainless steel is a durable material and works well at sorting out hard and tough items from the leaves.

You should definitely consider using grinders with your cannabis leaves. Not only are they made of durable materials, but include extremely sharp teeth and special technology built into them to help make sure your leaves are properly cut and sorted through. Many are also portable so you can easily take your grinder with you no matter where you decide to go.